DocuMate 252 Scanner User’s Guide 27ScanningCheck the Scan Settings Before Scanning1. To check the scan settings before scanning, press, hold down,and then release, either the Simplex or Duplex button.The One Touch Properties window opens for you to view andchange the settings before scanning. This sample shows thecurrent description of setting 6.The One Touch Button Panel also opens with the description ofthe selected settings.To Refresh the One Touch 4.0 settings, click the Refreshbutton.If you make changes in the One Touch Properties window, thenclick the Apply button, the information in the One Touch panelwill update to show the new settings.2. When you are ready to scan, press either the Simplex orDuplex button, or click OK to close the window then click thebutton on the One Touch Button Panel.Press, hold down,and then releaseeither button tosee the setting forthe selected LEDnumber.Note: The configurations shownon this example of the OneTouch Properties window are forillustration purposes only. Theconfigurations you see on yourOne Touch Properties windowmay be different.This numbercorresponds to theLED on the scanner.The icon indicates theDestination Applicationfor this setting.The current name of thesetting. Your document will be scanned withthese options for setting Number 6.
