Scanning with the WIA Interface102 DocuMate 252 Scanner User’s Guide12. If necessary, adjust settings of the previewed image:• Change the button selection for the type of image.• Adjust the custom settings; refer to the next section, “FineTuning Your Scans”.• Click the Page size drop-down arrow and choose the sizeof the pages you’re scanning.13. Preview the image again. When you are satisfied with theimage, click the Scan button.If the Create single page items check box is selected on theScan pane, the scanned item appears as a thumbnail on thePaperPort desktop.If the Create single page items check box is not selected,thumbnails do not appear until you indicate the scanning job isfinished.14. On the PaperPort - Scan message box, click Done.Fine Tuning Your ScansYou can select new settings before you scan an item to fine tuneexactly how you want to scan it.To select the scanner settings before you scan:1. On the scan window, click Adjust the quality of the scannedpicture.NOTE: If you preview when scanning a stack of documents, thefirst page of the stack feeds through the ADF for the preview.After adjusting the scanner settings, replace that page on thestack so it is scanned with the rest of the pages.
