Scanning28 DocuMate 252 Scanner User’s GuideScan from the One Touch Button PanelYou can scan from the One Touch Button Panel on the screen.1. Adjust the paper guide for the width of paper and load thedocuments with their tops into the Automatic DocumentFeeder.For Simplex (one-sided) scans, load the documents face down.For Duplex (two-sided) scans, the documents can be face up ordown because both sides are scanned.2. Now click on the One Touch icon in the Windows NotificationArea (at the bottom right corner of the screen).The One Touch Button Panel opens and shows the first five on-screen scanning buttons. Click the arrows to cycle through all 9settings.3. On the screen—not on the scanner—click the button you wantto use to scan.The scanner begins scanning. When the process finishes, thescanned images appear in the Destination Application, just as ifyou scanned with the Simplex or Duplex scanner buttons.The One Touch Icon.NOTE: The One Touch Properties window must be closedbefore you can scan from the Button Panel.NOTE: Your scanner comes with 9 factory-preset One Touchbutton settings. You can reconfigure and rename all the buttons.Click these arrowsto navigate throughthe 9 buttons.Click the button youwant to use to scan.For example, if you want to scanwith button 2, which converts thedocument to PDF, click here.Or if you want to scan with button 4, whichattaches the scanned document to ablank email message, click here.
