Scanning with the ISIS Interface108 DocuMate 252 Scanner User’s GuideDots per inch—Click the menu arrow and choose a resolution(dpi). Your Xerox DocuMate 252 scanner can scan at up to600 dpi.Page Size—Click the menu arrow and choose a page size.Your Xerox DocuMate 252 scanner can scan a page up to8.5" x 14".Brightness—Drag the sliders or click the arrows to the right orleft to adjust the brightness in small increments. Click thebuttons Darken, Normal, or Lighten to move the slide in largersteps.Contrast—Drag the sliders or click the arrows to the right orleft to adjust the contrast. Contrast is set automatically for Blackand White.2. To scan only a specific area of the image, click the Area button.The Set Scanning Area dialog box opens.3. Click in the image and drag a rectangle around the area youwant to scan.The boxes to the left show the relative position and size of theselected area.You can now move and resize the rectangle to adjust thespecific area to scan.4. To move the rectangle, put the crosshairs cursor in it, holddown the Ctrl key and drag the mouse.You can also type new numbers in the boxes on the left.5. To resize the rectangle, click in the Width or Length boxes andtype new measurements.To set the units of measurements, click the menu arrow for theUnits box and choose the measurement units.6. To start over with a new rectangle, click on the image and draga new rectangle.7. When the area is exactly what you want, click OK.Now when you scan with the ISIS interface, only the selected areaappears as an image in the Destination Application.
