DocuMate 252 Scanner User’s Guide 105Scanning with the ISIS InterfaceWhen you press the button to scan, the One Touch ISIS Scanwindow opens. Use this window to select scanning options andstart the scanner.1. Click the button most appropriate for the item you’re scanning.2. Click the Duplex box to scan both sides of the documents.3. Click Preview One to preview the image before scanning.The image is displayed on the right side of the window.4. Click the Define button and adjust the scan settings, ifnecessary.You can also click one of the other scan type buttons if youwould rather scan with it. For example, if Color Document isselected you can click GrayScale in case you decide to scanwith it instead.5. When you’re ready to scan, replace the preview page in itsoriginal position in your document then press Scan All.The document is scanned with the new scan settings.NOTE: If you preview when scanning a stack of documents, thefirst page of the stack feeds through the ADF for the preview.After adjusting the scanner settings, replace that page on thestack so it is scanned with the rest of the pages.Click a buttonto choose thetype of scan.Click Define tochange thescan settingsfor the selectedbutton.Click PreviewOne to seewhat the firstscanned pagelooks like soyou’ll knowwhich scansettings toadjust. Click Scan All when you’re ready to scanall the pages. Remember to put thepreview page back onto the stack so itgets scanned with the new settings too,
