Toshiba TC9349AFG Manual

TC9349AFG2006-02-24913. Buzzer Output TimingNote: To output the buzzer, set P4-2 to the output state (set the I/O control port to “1”).Note: The buzzer is stopped compulsory by setting BEN = 0.Note: When the frequency setting is changed during buzzer output in Mode B, it will be updated and the 10-Hztiming change points changed.ブザー周波数ｚBUZR 10H"1"ブザー出力(モードB)"0"ブザー出力(モードA)ブザー出力(モードC)Ｅ。ブザー出力中にB Nビットに"1"を再度セットすると50ms延長されるブザー出力(モードD)50msブザー周波数出力期間50ms休止期間休止期間500ms500msモードCでの出力状態出力期間"1"最大10msｚBUZR 10H 最大10msＢＥＮビットへのデータセットBuzzer frequencyData set to BEN bitBuzzer output (Mode A)BUZR 10 HzBuzzer output (Mode B)10 ms max.Extended by 50 ms by setting the BEN bit again to “1”during buzzer outputBUZR 10 HzBuzzer output (Mode C)10 ms max.Stop periodBuzzer frequencyoutput periodBuzzer output (Mode D) Stop periodOutput period