Toshiba 2000 V Series Manual

Also see for 2000 V Series: User manual

6F8C0845 1296.3 RAS Information Read Data6Table 6-9 7-Segment LED Status CodesModule Status Code Description70 (46H) DN611 detects an error in duplicate node address check.72 (48H) DN611 cannot communicate with slave devices.73 (49H) Vendor ID, product type, and product code of a slave device differfrom those on the DN611 scan list.75 (4BH) No slave device exists on the network. No slave device is registeredon the scan list.76 (4CH) DN611 has detected communication timeout due to no responsefrom slave devices.77 (4DH) Slave device transmission size differs from that on the DN611 scanlist.78 (4EH) DN611 unable to start transmission to slave devices.79(4FH) DN611 unable to send to slave devices.80(50H) DN611's communication port is in idle mode.81(51H) DN611's communication port is in fault mode.82(52H) Send/receive data fragment error83(53H) Slave device initialization refused.84(54H) Slave device initialization not completed.85(55H) DN611 receive buffer overflow91(5BH) DN611 busoff92(5CH) DN611 network power error