xii model 2000 DeviceNet Module Manual (DN611/DN611A)Limitation of ApplicationsThe equipment has been designed and manufactured for use in an industrial environment.However, the equipment is not intended to be used for systems which can endanger human life(Note 1).Consult Toshiba if you intend to use the equipment for a special application which involves humanlife and has great influence on the maintenance of the public function (Note 2). This is why suchapplication requires special care on the operation, maintenance, and control of the system (Note 3).(Note 1) The systems which can endanger human life are life maintenance systems, equipmentinstalled in the surgery, and other medical equipment.(Note 2) The systems which involve human life and have great influence on the maintenance of thepublic function mean the main control system of a nuclear power plant, safety andprotection system of a nuclear power facility, transport operation and control systems formass transportation, control systems of aviation and space systems, and other systemsand subsystems where safety is critical.(Note 3) "Special care" means to build a safety system (foolproof design, fail safe design,redundancy design, etc.) in full consultation with Toshiba's engineers.ImmunityToshiba is not liable for any loss caused by fire, earthquake, action by a third party, or otheraccidents, or the operator's intentional or accidental misuse, incorrect use, or use under abnormalcondition.Toshiba is not liable for any incidental loss caused by the use or non-use of this product, such asloss of business profits, suspension of business, or loss or change of data on memory.Toshiba is not liable for the loss caused by an operation contradictory to any of the instructionsstated in this manual.Toshiba is not liable for the loss caused by an incorrect operation in combination with otherequipment.Toshiba is not liable for the loss caused by a malfunction in combination with an application programmade by the customer.NOTE:Use cellular phones and PHSs at least one meter away from the working equipment, transmissioncables, and I/O bus cable. Otherwise, the system can malfunction.