Siemens SIPROCESS GA700 Operating Manual

Also see for SIPROCESS GA700: Compact operating instructions Quick start Operating instructions Operating instructions Compact operating instructions

Functions6.27 [4] CommunicationsOperating with the Local User InterfaceOperating Manual, 06/2017, A5E31930478-05 2476.27.2 Setting communication via EthernetFirst settingNotePlausibility checkThe parameter assignment of the Ethernet communication is checked for plausibility.Parameter changes that result in inadmissible address combinations are rejected.1. Main menu > "4. Communications" > "1. Ethernet"2. Call the parameter display: Press .In addition to the factory-set MAC address, the parameter display includes threeadditional parameter fields that you can use to assign addresses for the Ethernetcommunication:– IP address– Subnet mask– Default gateway addressThe operation/setting procedure is the same for all three address parameters.3. Set IP address:– Open the parameter field.– Authorize access with Expert PIN.– Enter the four components of the required IP address one after the other.4. Set subnet mask:Procedure is the same as step 3.5. Assign default gateway address:Procedure is the same as step 3.Change subnet mask1. Main menu > "4. Communications" > "1. Ethernet"2. Call the parameter display: Press .3. Set the default gateway address to 0:– Write down the gateway address.– Open the parameter field.– Authorize access by input of Expert PIN.– Enter "0" in all four components of the gateway address.4. Enter new subnet mask.

/ 306

Related manuals for Siemens SIPROCESS GA700

Siemens SIPROCESS GA700 Operating Instructions Manual

Siemens SIPROCESS GA700 Quick Start Manual

Siemens SIPROCESS GA700 Compact Operating Instructions

This manual is suitable for:

SIPROCESS GA700

Siemens SIPROCESS GA700 Operating Manual

Product

Learn More

Legal