Sharp IV-C35M User Manual

Also see for IV-C35M: User manual

Contents

Setting the Conditions for Each Object Type3-1133. Select the " SET EXTRACT COLOR" andpress the SET key. On the sub-menu, specifydetails of color extraction function.EXTRACT COLOR NO.Enter the register number of the extractedcolor that is used for measurement (enter 0in this example). Eight colors from 0 to 7can be registered as reference colors.These can be used for each measurement,independently.COLOR EXTRACTION AREASelect " COLOR EXTRACTION AREA"using the up and down arrow keys, andpress the SET key to enter the settingscreen.1. Press the SEL key and move the cursorto the "F" (freeze image) item. Press theup and down arrow keys to change "F"to "T" (through image) to capture thecurrent image, and adjust position of aworkpiece.Note: If the captured image afterselecting "T" is black, the shutterspeed may not appropriate. In thiscase, change the shutter speedon the "OBJ TYPE I/O" to makethe image brighter.For details about the shutterspeed, see page 3-50.2. Change the image from "T" to "F" and press the SEL key.3. Move the coordinate of " UP.L" and " LO.R" to determine position and size of the colorextraction area, and press the SET key.Register extracted colorSelect " REG" using the up and downarrow keys and then press the SET key.From the popup menu, select "NEW" or"ADD."1EXTRACT COLOR NO 0 (0 7)2COLOR EXTRACTION AREA SET (248, 232) (263, 247)3FINE ADJUSTMENT (TO NEXT SUB-MENU)COLOR F C1 BRTSET EXTRACT COLOR SCREEN COND SAVEHUE (START PNT080 END PNT060)CHROMA (U.LM130 L.LM110)BRIGHT LEV (U.LM130 L.LM110)1UP. L (098, 293)2LO. R (113, 308)3MOVE4REG=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNCCOLOR F C1 BRTRECTANGLE RESET RETURNX: 098 Y: 2931UP. L (098, 294)2LO. R (113, 308)3MOVE4REG=DECISION ESC=BACK SEL=CHNG IMG TRG=FUNCCOLOR F C1 BRTRECTANGLE RESET RETURNX: 098 Y: 294NEWADDUNDO