9-7Object Counting by Binary Conversion9Set the evaluation conditionsHow to move to the evaluation condition setting screenThere are two methods for getting to the evaluation condition setting screen.1) Select "COND" in the upper function menu onthe MEA-CND (or REG COND) screen andpress the SET key. Select "EVALUATION" onthe pop up menu to go to the EVALUATCOND screen.2) Move the cursor to the "EVALUATION COND"item on the menu tree screen and press theSET key.The "EVALUAT COND" (evaluation conditions)screen will appear.For details about the evaluation conditions,see page 3-28.MEA-CND SCREEN COND SAVE1WINDOW BINARY-IMG-MASK2REGISTER NO. 03REGISTER EXIST YES4MASK BINARY IMG REF-IMG5BIN IMG MASK (TO NEXT SUB-MENU)REGISTER NO.6BIN AREA CONDRED F C1 BRT=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNCIMG PRE-PROCREG CONDEVALUATIONNUM-CALCOUT1REGISTER NO.2MEAS SHAPE3MEAS AREA4THRESHOLD5INVERT B/WCOLOR F C1 BRTSELECT OBJECT TYPE CONDOBJECT TYPE CONDTYPE00TYPE01TYPE RUN CONDIMAGE-ADJMEA-CND(CAMERA1)MEAS0POSI-DEVIATIONMEAS01(CNT-BIN-OBJ F)IMG PRE-PROCMEAS CNDREG-CONDEVALUATION CONDNUM-CALCOUT-CONDMEAS(NEW)MEA-CND(CAMERA2)FINAL NUM. CALCFINAL OUTPUT CONDOBJ-TYPE I/OOBJ-TYPE SYS.SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP1REGISTER NO. 0(0~3) [TEST RESULT] [OUTPUT]2CONDITION SET AUTO( 10%)3NUMBER OF OBJ 0000~3000 K= NO4TOTAL AREA 000000~245760 A= NO5TEST EXEC(WITH-POSI.ADJ WITHOUT-POSI.ADJ)SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNCRED F C1 BRTEVALUAT COND SCREEN COND SAVE EDIT SEL
