Sharp IV-C35M User Manual

Also see for IV-C35M: User manual

Contents

2-13Setting the Operating and System Conditions2(2) Manual measurementWith this function, you can measure distance between two points, the distance between Xcoordinates, or the distance between Y coordinates that were selected manually on the operationmain screen.Operation procedure1. Select " EXTENSION FUNC." on the"TYPE RUN COND" screen using the upand down arrow keys. Then press the SETkey.2. Select "MANL-MEAS" on the popup menuand press the SET key.3. Move the cursor to the upper function menuby pressing the TRG/BRT key and select"SCREEN." Then press the SET key.Select "OPS-MENU" on the popup menuand return to the operation screen.4. Move the cursor to the "MNU-CHG"(menu change) item on the bottom ofthe operation screen and press theSET key to change the bottom menudisplay. Move the cursor to "MANL-MEAS" (manual measurement) andpress the SET key.5. The menu items for manualmeasurements will appear on thescreen.6. Select " CURSOR1-COORD" or "CURSOR2-COORD" and pressthe SET key.7. Move cursor 1 or cursor 2 using theup/down/left/right keys. (They moveone pixel at a time.)The distance between the twopoints, and between the Xcoordinates and Y coordinatesfor the two points, will change onreal time basis.8. After the positions of the points are determined, press the SET key.9. When the operation is complete, press the ESC key.The manual measurement menu items will disappear.1MONITOR OUTPUT CAM12CAPTURE IMG PARTIAL-IMG3MESSAGE DISPLAY YES(NUMERIC)4PATTERN DISPLAY YES5SHOW BINARY IMG YES6SHOW FIX IMG YES7OPS MAIN DISP YES8DISP CHG-EVAL NO9PC-MNTR NO0THROUGH DISPLAY NOqEXTENSION FUNC. MANL-MEASTYPE RUN COND SCREEN SAVE COLOR F C1 BRT1MONITOR OUTPUT CAM12CAPTURE IMG PARTIAL-IMG3MESSAGE DISPLAY YES(NUMERIC)4PATTERN DISPLAY YES5SHOW BINARY IMG YES6SHOW FIX IMG YES7OPS MAIN DISP YES8DISP CHG-EVAL NO9PC-MNTR NO0THROUGH DISPLAY NOqEXTENSION FUNC. NOTYPE RUN COND SCREEN SAVE COLOR F C1 BRTOPS-MENUMAINSELECTRETURN(TYPE00)AREA1MEAS ms 2002-10-14 10:38MEASURE 0 CAM1 POSI DEVIATION12MNU-CHG NEXT-NG CHG-C1 CHG-C2 MANL-MEAS SHORTCUTCrosshair cursor 1 Crosshair cursor 2Manual measurementmenu