Distance and Angle Measurement18-618[2] When "DST" is selectedDISTANCE NO.Enter a register number. The register numbersavailable are 0 to 15.DISTANCESelect an distance.COND. 1 COND. 2Specify conditions for the distance that were selected in the " DISTANCE" item.DISTANCE EVALUATSpecify judgment conditions for distance.[TEST RESULT]: When executing a test from the " RUN A TEST" line the result will bedisplayed here.[OUTPUT]: Specify a destination for the output of test results: "NO," "Y," or "C."RUN A TESTPress the SET key to execute a test.1OBJ DST2DISTANCE NO. 01(0~15)3DISTANCE DIST-BETW-2PT4COND.1 REG NO MDL 05COND.2 REG NO MDL 0[TEST RESULT] [OUTPUT]6DISTANCE EVALUAT 000.0~702.0 NO7RUN A TEST EXECREGISTER NO.DISTANCEDIST&AGL COND SCREEN COND SAVE RED F C1 BRTNODIST-BETW-2PTDIST-BETW-XDIST-BETW-YON .ecnatsidtcelestonoDecnatsidehT2neewtebstniopecnatsidehTXneewtebsetanidroocecnatsidehTYneewtebsetanidroocPoint 1 (X1, Y1)Point 2 (X2, Y2)The distance between Ycoordinates ( 2-Y1Point 1 (X1, Y1)Point 2 (X2, Y2)The distance between Xcoordinates ( X2-X1Point 1 (X1, Y1)Point 2 (X2, Y2)The distance between 2 points(X2-X1)2+(Y2-Y1)2
