Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 200 (Page 1 of 1)MMC: 200 OPEN CUSTOMERPROGRAMMINGFOR: ALL SYSTEMSPurpose: Opens (enables) or closes (disables) customer-level programming.If programming is not opened and an attempt is made to access a customer-level MMC,the error message [NOT PERMIT] will be displayed. A four-digit passcode is required toenable customer programming (by default this is 1234, but can be changed in MMC 201,if required). Each digit can be 0–9. When opened, this MMC allows access to all MMCsspecified by the system installer in MMC 802, Customer Access MMC Number.ACTION DISPLAY1. Press Transfer/TRSF 200Display shows ENABLE CUS.PROG.PASSCODE:_2. Enter passcode ENABLE CUS.PROG.PASSCODE: 6666Correct code shows ENABLE CUS.PROG.DISABLEIncorrect code shows ENABLE CUS.PROG.PASSWORD ERROR3. Dial 1 for ENABLE or 0 for DISABLEORPress VOLUME keys to select ENABLE or DIS-ABLE and press RIGHT soft keyENABLE CUS.PROG.ENABLE4. Press SPEAKER to advance to MMC entry leveland press VOLUME keys to select MMC (e.g.212)OR212:ALARM RINGSELECT PROG. IDEnter MMC number and press RIGHT softkey to enter MMC5. Press Transfer/TRSF to exitDefault Data: DISABLE (closed)Passcode=1234Related Items: MMC 201 Change Customer PasscodeMMC 501 System-Wide TimersMMC 802 Customer Access MMC Number