Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 318 (Page 1 of 2)MMC: 318 DISTINCTIVE RINGFOR: DCS CI CII 816 408 408i iDCS100 iDCS500 OS500Purpose: Sets a distinctive ring for stations when calling other stations or for trunks call-ing stations. You can set the tone (T) for keysets to one of eight ring values (1-8), or thecadence (C) of SLTs to one of five ring values (1–5). The default for both is to follow thestation ring (F-STN).TONE DESCRIPTIONF-STN Calls from the programmed station or trunk will ring keysets with the keyset us-ers’ choice of ring frequency.1–8 Calls from the programmed station or trunk will ring keysets with this ring fre-quency.CADENCE DESCRIPTIONF-STN Calls from the programmed station or trunk will ring with the normal SLT ringcadences.1 Calls from the programmed station or trunk will ring SLTs with the intercom ringcadence.2 Calls from the programmed station or trunk will ring SLTs with the CO ring ca-dence.3 Calls from the programmed station or trunk will ring SLTs with the DOOR ringcadence.4 Calls from the programmed station or trunk will ring SLTs with the ALARM ringcadence.5 Calls from the programmed station or trunk will ring SLTs with the CALLBACKring cadence.ACTION DISPLAY1. Open programming and select 318Display shows [201] DIST.RINGT:F-STN C:F-STN2. Dial station or trunk number (e.g., 205)ORPress VOLUME keys to select station or trunk andpress RIGHT soft key to move cursor[205] DIST.RINGT:F-STN C:F-STN3. Press VOLUME keys to select T value (e.g. 1) andpress RIGHT soft key to move cursor to C field [205] DIST.RINGT:1 C:F-STN4. Press VOLUME keys to select C value(e.g. 2) [205] DIST.RINGT:1 C:25. Press Transfer/TRSF to store and exitORPress SPEAKER to save and advance to nextMMC