Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 604 (Page 1 of 2)MMC: 604 ASSIGN STATION TOPAGE ZONEFOR: ALL SYSTEMSPurpose: Assigns a keyset to any or all of the internal paging zones. The total number ofkeysets that can receive a page is limited to:DCS CII 816 408/408i iDCS100 iDCS500 & OS50080 40 12 4 40 99Q For all systems except iDCS and OS500If a keyset is flagged as “1” in a zone column, it will receive pages for that zone. If the keyset isflagged as “0,” it will not receive pages for that zone. If “∗” is set as “1”, a keyset will receive pagesfor all zones.408/408i systems are assigned internal page zones 1–2 only. Therefore, only these zones can beflagged as “1”. Zones 3 and 4 are flagged as “0”.ACTION DISPLAY1. Open programming and select 604Display shows ENTRY:STN :1234∗01:NONE: 000012. Enter number (01–80 or 01–40 or 01–12 or 1–4depending on your system–see above) e.g., 04ORPress VOLUME keys to make selection and pressRIGHT soft key to move cursorENTRY:STN :1234∗04:NONE: 000013. Enter station number (e.g., 205)ORPress VOLUME keys to make selection and pressRIGHT soft key to move cursorENTRY:STN :1234∗04:205 :000014. Move cursor under page zone desired (e.g. 2) bypressing VOLUME keys and enter the digit 1 underthe zonePress RIGHT soft key to return to step 2 tocontinue with entriesENTRY:STN :1234∗04:205 :010015. Press Transfer/TRSF to store and exitORPress SPEAKER to store and advance to nextMMCDefault Data: No stations assignedAll zone (“∗”) is set (“1”)Related Items: None