Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 845 (Page 1 of 2)MMC: 845 WLI PARAMETERSFOR: OS500Purpose: Sets the parameters for the WLI card and up to eight Wireless Base Stations(WBS).For the WLI card, the options are:Parameter DescriptionSYSTEM ID ID used to identify systems in the wireless environment. Different IDsare used for each system.SYSTEM KEY Key used for registering wireless terminals. Different keys are used foreach system.1st DNS IP IP address of the first Domain Name Server (DNS).2nd DNS IP IP address of the second DNS.2nd WBS IP IP address of all WBS in the system used by the wireless terminals.Different IPs are assigned to each system.CODEC LIST Codec that can be used for VoIP calls between WBS and terminals.G.711u, G.711a, G.726, and G.729 may all be designated.For each WBS (WBS1 to WBS8), the options are:Parameter DescriptionIP ADDRESS The IP addressGATEWAY Gateway address of network on which WBS is installedNET MASK Netmask of network on which WBS is installedMAC ADDR MAC address of WBS that the system received when WBS wasconnected to the systemVERSION Current software versionSTATUS Operational status (On/Off)USE RF CH. The RF channel number usedACTION DISPLAY1. Open programming and select 845Display shows WLI : SYSTEM IDWBS242. Press VOLUME keys to select WLI or WBS(1–8)and press RIGHT soft key WLI : SYSTEM IDWBS243. Press VOLUME keys to select other options as re-quired