Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 404 (Page 1 of 1)MMC: 404 TRUNK NAMEFOR: ALL SYSTEMSPurpose: Allows a name, up to 11 characters, to be entered to identify an individualtrunk.Names are written using the keypad. Each key press moves the cursor and enters theselected character.* For example, if the name is “TELECOMS”, press the number “8”once to get the letter “T”. Now press the number “3” twice to get the letter “E.” Continueselecting characters from the keypad to complete the name. Press the programmable “A”key to toggle between upper and lower case text. (Refer to section 1.5.2 in Part 1 for keydescriptions.)* Tip: When the character you want is on the same key as the previous character you typed in,press the VOLUME UP key to move the cursor to the right, then select the character.The # key can be used for the following special characters (in sequence of key presses):# space & ! : ? . , % $ - < > / =[ ] @ ^ ( ) _ + { } | ; " → `ACTION DISPLAY1. Open programming and select 404Display shows [701] TRUNK NAME2. Dial trunk (e.g., 704)ORPress VOLUME keys to select trunk and press theRIGHT soft key to move the cursor[704] TRUNK NAME_3. Enter trunk name using the procedure describedabovePress RIGHT soft key to return to step 2[704] TRUNK NAMETELECOMS4. Press Transfer/TRSF to store and exitORPress SPEAKER to store and advance to nextMMCDefault Data: No names enteredRelated Items: MMC 104 Station NameMMC 405 Trunk Number