• On (Max X432)SW395SC385 : Images can be zoomed in on with the optical zoom (1x - 18x), extraoptical zoom (up to 36x) and the electronic zoom (higher zoom factors, up to 432x).• On (Max X864)SW396SC386 : Images can be zoomed in on with the optical zoom (1x - 36x), extraoptical zoom (up to 72x) and the electronic zoom (higher zoom factors, up to 864x).• Off: Does not use the digital zoom.• Default: OffNoteSC384:• When “On (Max X288)” is selected, digital zooming will stop when the zoom factor has reached 36x.• When the zoom factor is 36x or more, the setting of the preset positions will become unavailable.SW395SC385:• When “On (Max X432)” is selected, digital zooming will stop when the zoom factor has reached 36x.• When the zoom factor is 36x or more, the setting of the preset positions will become unavailable.SW396SC386:• When “On (Max X864)” is selected, digital zooming will stop when the zoom factor has reached 72x.• When the zoom factor is 72x or more, the setting of the preset positions will become unavailable.[Pan-Tilt degree/Zoom ratio display]SW395SC385SC384Select “On” or “Off” to determine whether or not to display the current panning/tilting degree and the zoom ratiodisplay on images when the camera is being operated manually.• On: Displays the current panning/tilting degree and the zoom ratio display.• Off: Does not display the current panning/tilting degree and the zoom ratio display.• Default: OnNote• When “On” is selected, the panning/tilting degree and the zoom factor will be displayed at the positionselected for “OSD position” on the [Basic] tab of the “Basic” page. (®page 51)[Camera position display]SW396SC386When operating the camera manually, you can select what information to display in the image from thefollowing.• Off: Information is not displayed in the image.• Pan-Tilt degree/Zoom ratio display: The Pan-Tilt degree/Zoom ratio display is displayed.• Direction display: Direction display is displayed.• Default: Pan-Tilt degree/Zoom ratio displayNote• When “Pan-Tilt degree/Zoom ratio display” is selected, the Pan-Tilt degree/Zoom ratio display isdisplayed in the position specified in “OSD position” on the [Basic] tab. (®page 51)• When “Direction display” is selected, the direction display is displayed in the position specified in “OSDposition” on the [Basic] tab. (®page 51)[Tilt Angle]Select the maximum degree for tilting from the following. (Level = 0°)•SW395SC385SC38410°/ 5°/ 3°/ 0°/ –3°/ –5°/ –10°/ –15°/ –20°/ –25°/ –30°•SW396SC38610°/ 5°/ 3°/ 0°/ –3°/ –5°/ –10°/ –15°Default: 0°92 Operating Instructions11 Configure the settings relating to images and audio [Image/Audio]
