11.5 Configure the settings relating to the cameraoperations [Cam. Function]Click the [Cam. Function] tab on the “Image/Audio” page. (®page 43, page 45)Configure the settings relating to camera operations.[Home position]A preset position (®page 108) can be set as the home position.When a preset position is set as the home position, “H” will be displayed next to the preset position number.• Default: OffNote• To move the camera to the home position when the power of the camera is turned on, select “Homeposition” for “Self return”.[Self return]When the time set for “Self return time” has passed after manual operations of the camera, the camera willautomatically be in the selected mode.• Off: Self return is not performed.• Home position: When the set time has passed, the camera will move to the home position automatically.• Auto trackSW395SC385 : When the set time has passed, the camera will move to the home positionand will start the auto track function. The camera will repeat this action (moving to the home position andstarting the auto track function) afterward.• Auto trackSW396SC386 : When the set time has passed, the camera will move to the home positionand will start the advanced auto track function. The camera will repeat this action (moving to the homeposition and starting the auto track function) afterward.• Auto pan: When the set time has passed, the camera will start the auto pan function.• Preset sequence: When the set time has passed, the camera will start the sequence display.• PatrolSW396SC386 : When the set time has passed, the camera will start the patrol.• Default: OffNote• This function is also useful to automatically set the camera in a specific mode when the power of thecamera is turned on.• The self return function works even when the setup menu is displayed.90 Operating Instructions11 Configure the settings relating to images and audio [Image/Audio]