About the log list windowNumber of the listed logsTotal number of the logs of the selected log type and a number of the log being displayed on the top of the loglist will be displayed.Note• Enter the desired log number and press the [Enter] key on the keyboard. The log of the designatednumber will be displayed on the top of the log list.[Top] buttonClick this button to display the log listed at the top.[Prev. page] buttonClick this button to display the previous page of the log list.Note• When the mouse button is held down while placing the mouse pointer on the [Prev. page] button, thedisplayed log number will be decreased. When the mouse button is released, the decrement of the lognumber will stop and the log number displayed at the moment when the mouse button is released willbe the top of the currently displayed page.[Next page] buttonClick this button to display the next page of the log list.Note• When the mouse button is held down while placing the mouse pointer on the [Next page] button, thedisplayed log number will be increased. When the mouse button is released, the increment of the lognumber will stop and the log number displayed at the moment when the mouse button is released willbe the top of the currently displayed page.[Last] buttonClick this button to display the log listed at the bottom.[Time & date]Time and date when each log has been filed will be displayed.Note• When “Off” is selected for “Time display format” (®page 49), time and date of alarm occurrence willbe displayed in 24-hour format.• The recording timing of logs is as follows.– Alarm log: Alarm occurrence time and date will be filed as a log.– Manual/Schedule log: Time and date when recording of images onto the SD memory card startedmanually or during the period of the schedule will be filed as a log. When images are recordedsequentially, logs will be filed every one hour. However, depending on the photographic subjectand the setting used, logs may be filed in periods of over on hour.– FTP trans. error log: Logs will be filed every one hour.[Event]The event type will be displayed. The event types will be displayed only when displaying the alarm log list.• TRM1: Alarm by alarm input to Terminal 1• TRM2: Alarm by alarm input to Terminal 2• TRM3: Alarm by alarm input to Terminal 3• VMD: Alarm by VMD alarmOperating Instructions 356 Display the log list
