4. The settings for “Auto focus” and “Dwell time” can be configured for each position independently.5. Click the [Set] button.6. The settings for each item such as “Super Dynamic” can be configured for each position independently.The settings for “Super Dynamic” (Wide dynamic rangeSC384 ), “Back light compensation (BLC)” and“Mask area” are updated immediately.Note• When registering the preset position, the camera direction may move slightly.Position No[Preset ID]Select “On” or “Off” to determine whether to enable or disable the preset ID display. This function can be appliedto each preset position.• On: Displays the preset ID.• Off: Does not display the preset ID.• Default: OffIMPORTANT• When “Preset ID (0-9,A-Z)” or “Preset ID” is configured, it is necessary to click the [Set] button to applythem.Note• When “On” is selected, the entered preset ID will be displayed at the position selected for “OSDposition” on the [Basic] tab of the “Basic” page. (®page 51)[Preset ID (0-9,A-Z)]Enter the preset ID to be displayed on images. This function can be applied to each preset position.• Available number of characters: 0 - 20 characters• Available characters: 0-9, A-Z and the following marks. ! " # $ % & ' ( ) * + - , . / ; : = ?• Default: None (blank)Note• The entered preset ID will be displayed next to the preset position number on the pull-down menu.When “On” is selected for “Preset ID”, the preset ID will be displayed on images.[Auto focus]Select “Auto” or “Off” to determine whether to enable or disable the auto focus function after the camera hasmoved to a preset position. This function can be applied to each preset position.• Auto: The auto focus function will be activated after moving to a preset position.• Off: Does not activate the auto focus function after moving to a preset position.• Default: OffNote• When the preset position is set to shoot the following objects, it is recommended to select “Off”, andadjust the focus before registering the preset positions.An object whose contrast is lowAn object whose depth never changesAn object with high luminance such as a spotlight[Dwell time]Select a dwell time (duration the camera stops for at each preset position) for the preset sequence operation.110 Operating Instructions11 Configure the settings relating to images and audio [Image/Audio]
