Panasonic WV-SW390 Series Operating Instructions Manual

Also see for WV-SC384: Integration note Product catalog Installation guide Operating instructions Operating instructions

Contents

Panasonic WV-SW390 Series Operating Instructions Manual Manual pdf 156 page image

IMPORTANT• When entering the host name for “SMTP server address” or “POP server address”, it is necessary toconfigure the DNS settings on the [Network] tab of the “Network” page. (®page 160)[Authentication]• TypeSelect the authentication method to send e-mails from the following.– None: It is not necessary to clear any authentication to send e-mails.– POP before SMTP: It is necessary to first clear the POP server authentication to use the SMTP serverto send e-mails.– SMTP: It is necessary to clear the SMTP server authentication to send e-mails.– Default: NoneNote• When you don’t know the authentication method to send e-mails, refer to the network administrator.• User nameEnter the user name to access the server.– Available number of characters: 0 - 32 characters– Unavailable characters: " & : ; \• PasswordEnter the password to access the server.– Available number of characters: 0 - 32 characters– Unavailable characters: " &[Sender’s mail address]Enter the mail address of a sender.The entered mail address will be displayed in the “From” (sender) line of the sent mails.• Available number of characters: 3 - 128 characters• Available characters: Alphanumeric characters, the at sign (@), the period (.), the underscore (_), andthe hyphen (-).16.2 Configure the settings relating to the FTP server[FTP]Click the [FTP] tab on the “Server” page. (®page 43, page 45)The settings relating to the FTP server used to transmit the alarm images can be configured on this page.156 Operating Instructions16 Configure the settings of the servers [Server]