-58-• Check the camera installation height setting.An incorrect installation height setting can causemalfunction.Input the camera and target area heights correctly.41• Check if it is raining or snowing.Raindrops or other precipitation on the dome cancause misoperation.—• SENSITIVITY may be set too high.Use a lower SENSITIVITY setting. 41• Check if ON is selected for the STABILIZER setting.When STABILIZER is ON, auto tracking may startwhen there is image shake.Turn STABILIZER OFF.32Auto tracking suddenlystarts moving thecamera for no reason.Problem Cause and Recommended Action Reference Pages• Check for trees, flags, or other moving objects, aswell as standing water, glass, and other reflectingobjects in the target screen.If any such objects are in the area being monitored,mask them from the image.43• Check the camera installation height setting.An incorrect installation height setting can causemalfunction.Input the camera and target area heights correctly.41• Check if the OBJECT SIZE is LARGE.The larger the size, the easier it is to lose a target.Try a smaller size setting.41• Check if there are multiple moving objects in theimage.Try changing the TRACKING MODE setting toHIGH. This should provide some improvement.41Auto tracking moves thecamera, but the target islost immediately.Power cord sheathing isdamaged.• The power cord is damaged. Continued use creates the risk ofelectric shock and fire. Immediately unplug the power plug andcontact a qualified service person or system installer for servicing.Power cord becomeshot during operation.Power cord becomes warmor hot when it is bent orstretched during use.● Periodically check the power cord.
