Panasonic WV-CW970 Operating Instructions Manual

Also see for Super Dynamic III WV-CW974: Product catalog Product catalog Brochure & specs Specifications Operating instructions

Contents

Panasonic WV-CW970 Operating Instructions Manual Manual pdf 33 page image

Pan/Tilt settings■ Using the Pan/Tilt Setup MenuDisplay the pan/tilt setup menu from the setup menu toconfigure pan and tilt settings.First, display the pan/tilt setup menu.1. Display the setup menu (page 24), move the cursor toPAN/TILT O, and then press the CAM (SET) button.This will display the pan/tilt setup menu.* The following sections numbered q to !4 explainhow to use each of the pan/tilt setup menu items.(1) Position Number Selection (PRESET)Positions can be assigned numbers, each of which canbe configured with a monitoring position andmonitoring conditions.You can use either the PRESET item or the MAP item onthe pan/tilt setup menu to select a position number.Position numbers 1 through 4 are used for alarmfunctions (page 44) and operating them.1. Move the cursor to the 1 next to the PRESET item,and then tilt the joystick left or right to change theposition number to the one you want.2. Press the CAM (SET) button.This registers the position number setting anddisplays the preset setting menu.(2) Position Number Selection (MAP)You could use the MAP item on the pan/tilt setup menuinstead of the PRESET item to select a position number.1. Move the cursor to MAP O, and then press theCAM (SET) button.2. Move the cursor to the number you want to select,and then press the CAM (SET) button.This registers the position number setting anddisplays the preset setting menu. (this page)To select a position number in the range of 033 to064, move the cursor to 33-64 in the lower left cornerof the menu, and then press the CAM (SET) button.Preset numbers set subsequently are the same.Notes:• An asterisk (*) to the right of a position numberindicates that it already has a preset positionassigned to it.The home position number is indicated by theletter H next to the asterisk.• When the cursor is located at a position numberthat has a position ID, the position ID textappears next to ID: on the menu screen.● Position Setting (POSITION SET)See pages 25 and 26 for information on the settingmethod.● Adjusting Camera Position WhenChanging Cameras (PAN OFFSET SET)See page 26 for information on the setting method.● Preset ID Setting (PRESET ID)See pages 26 and 27 for information on the settingmethod.● Light Control (ALC/MANUAL)See pages 28 and 29 for information on the settingmethod.You can adjust the lens iris setting on the detailedmenu when MANUAL is set.-33-**PAN/TILT SETUP**1/2PRESET 1MAPHOME POSITION OFFSELF RETURN OFFAUTO MODE OFFAUTOPAN KEY AUTO PANPATROLPRIVACY ZONE OFFIMAGE HOLD OFFDIGITAL FLIP ONPROPO.P/T ONqetuo!1wryi!0**PAN/TILT SETUP**2/2AREA TITLE ON(USER)TILT ANGLE 0°CLEANING OFFRET TOP!2 !3!4**PRESET POSITION**261014182226301*591317212529ID:DOOR033-064 225-256RET TOP3711151923273148121620242832**PRESET POSITION**34384246505458623337414549535761ID:065-096 001-032RET TOP35394347515559633640444852566064PRESET NO. 1*POSITION SETPRESET IDALC/MANUALAF MODEDWELL TIMESCENE FILEPRESET SPEEDAUTO TRACKRET TOP DELONALCMANUAL L10SOFF••••••I255L HOFF