Panasonic WV-CW970 Operating Instructions Manual

Also see for Super Dynamic III WV-CW974: Product catalog Product catalog Brochure & specs Specifications Operating instructions

Contents

Panasonic WV-CW970 Operating Instructions Manual Manual pdf 22 page image

-22-1. Configure the AUTO MODE setting (page 35).Select AUTO PAN for the AUTO MODE setting andthen configure the AUTO PAN settings.2. Configure PRESET (page 33) and ALARM IN/OUT(page 45) settings.Register the preset position where you want autotracking to start as preset position 1. To performauto tracking after ALARM IN 1, selectAUTOTRACK for the ALARM IN1 setting.Note: ALARM IN1 through 4 can be configured withpreset positions 1 through 4 to specify the autotracking start position in accordance with the inputterminal where the alarm is input.3. Configure the AUTO TRACK setting (page 41).Specify the auto tracking period from the start ofAUTO TRACK to the end. Specify 50S for the AUTORELEASE setting. Configure the other parameters inaccordance with the operating environment.Important: Failure to configure settings inaccordance with the operating environment canresult in operation error. Configure the settingswhile carefully checking the AUTO TRACK setting(page 41).4. Configure the SELF RETURN setting (page 35).Select 10S, APAN for this setting.Operation Example 3: Enable manual switching toauto tracking while tracking atarget manually.1. Configure the AUTO PAN KEY setting.Select AUTO TRACK for the AUTO PAN KEYsetting.2. Configure the AUTO TRACK setting (page 41).Configure each parameter in accordance with theoperating environment.Important: Failure to configure settings inaccordance with the operating environment canresult in operation error. Configure the settingswhile carefully checking the AUTO TRACK setting(page 41).3. While using manual operation to track a target, startauto tracking.Perform manual operation (pan, tilt, zoom) to keepthe target being tracked in the centre of the targetframe. Press the AUTO PAN key to start autotracking of the target.Note: For information about target frame settings,see INDICATOR (page 43).Operation Example 4: Camera follows a presetsequence without autotracking during the day, andauto tracking from a homeposition at night.Important: The camera unit does not have aschedule function. Schedule settings can beconfigured only when the camera is connected to acontroller that is equipped with a schedule function(WJ-HD300A, WJ-SX650, etc.)**PAN/TILT SETUP**1/2PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTOPAN KEYPATROLPRIVACY ZONEIMAGE HOLDDIGITAL FLIPPROPO.P/TOFF10S APANAUTO PANAUTO PANOFFOFFONON**PAN/TILT SETUP**1/2PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTOPAN KEYPATROLPRIVACY ZONEIMAGE HOLDDIGITA FLIPPROPO.P/TOFFOFFOFFAUTO TRACKOFFOFFONON**PAN/TILT SETUP**1/2PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTOPAN KEYPATROLPRIVACY ZONEIMAGE HOLDDIGITAL FLIPPROPO.P/TOFFOFFAUTO PANAUTO PANOFFOFFONON**ALARM IN/OUT**ALARM IN1ALARM IN2ALARM IN3ALARM IN4CNT-CLS 1TIME OUTCNT-CLS 2COAX ALM OUTRET TOPAUTOTRACK1OFFOFFOFFOFF100MSOFFOFF**AUTO TRACKING**CAMERA HEIGHTOBJECT SIZESENSITIVITYTRACKING MODEZOOM CONTROLAUTO RELEASELOST MODEALARMAREA SETINDICATORRET TOP2.50MSMALLMIDMIDCONTINUOUS50SZOOM-OUTOFFOFF