Panasonic WV-CU980/G Operating Instructions Manual

Also see for WV-CU980: Software update procedure

Panasonic WV-CU980/G Operating Instructions Manual Manual pdf 43 page image

43When an all reset is carried out, the main unit settings that can be set using the menu functions of this equipment are all reset totheir initial states.Since the main unit settings are reset to the initial states, first-time setup will be necessary when the power to this equipment isswitched ON next and this equipment is started again. For details, refer to “First-time Setup” (☞ Page 16).The settings that are initialized by an all reset are the following.• Display/Buzzer Adjustment• Joystick settings• Network settings• Auto Login/Auto Logout Setting• Settings of the administrator• Settings of operators• Function Level settingsOperation procedure1 Switch ON the power supply while keeping pressed+ +The all reset execution confirmation screen is displayed.2 PressThe all rest execution screen is displayed for a few seconds.After that, the display transitions to the all reset executioncompletion screen.3 Switch OFF the power supplyMaintenance (continued)All Reset