Panasonic WV-CU980/G Operating Instructions Manual

Also see for WV-CU980: Software update procedure

Panasonic WV-CU980/G Operating Instructions Manual Manual pdf 33 page image

33Main unit settings (continued)You can register new operators or can change the contents of the settings. Up to 16 operators can be registered in the system.Note:• In order to ensure security, set an ID and password that cannot easily be guessed by a third party.• Take care not to forget the ID and password that have been set, and manage it appropriately away from the eyes of athird party.Operation procedure1 From the settings menu, select “006 OperatorSetup” (☞ Page 22 Steps 1 to 2)2 PressThe operator registration / change screen is displayed for afew seconds.3 Press or , and select the number of theoperator to be registered newly or whose contentsof settings are to be changedEach time or is pressed, the operator numberchanges successively from Operator 01 (Operator No. 1) toOperator 16 (Operator No. 16).When registering a new operator, select an operator numberto the right of which “No Assign” is displayed (indicating thatit is an unregistered operator number).4 PressThe user ID setting screen is displayed.5 Enter the user ID using the numeric buttonsThe user ID can be set within the values “00000000” to“99999999” (8 numeric digits).6 PressThe password input screen is displayed.7 Enter the password using the numeric buttonsThe password can be set within the values “00000000” to“99999999” (8 numeric digits).8 PressThe function level setting screen is displayed.Initial value: Level 19 Press or and select the function levelSetting range: 1 (Function level 1) to 3 (Function level 3)Refer to “Changing the Function Level” (☞ Page 34) fordetails of function levels. PressThe settings confirmation screen is displayed. PressThe settings registration screen is displayed for a fewseconds.After that, the set value is stored, and the screen returns tothat of Step 2. (When a new registration is made, the “NoAssign” display is hidden.)When the logged-in user is not an administrator, theadministrator ID input screen is displayed before theoperator registration or change screen is displayed (Step 2),and it will be necessary to input the administrator ID andpassword.For details of the method of inputting, refer to “Method ofUsing the Settings Menus” (☞ Page 22).Operator Registration or Change