Panasonic WV-CU980/G Operating Instructions Manual

Also see for WV-CU980: Software update procedure

Panasonic WV-CU980/G Operating Instructions Manual Manual pdf 13 page image

13Before Operation (continued)On the notation of operationsThe icons (illustrations) of the buttons or joystick used in the settings and operations of this equipment are described below.(1) Joystick unitIllustration of joystick unit Notation inthis manual Description of operationsMove the joystick in any one of the directions up, down*1, left, or right.Move the joystick up or down*1.Move the joystick left or right.Move the joystick to the left.Move the joystick to the right.Press the top button of the joystick.Rotate the zoom wheel controller either to the left or to the right.Rotate the zoom wheel controller to the left (in the counterclockwisedirection).Rotate the zoom wheel controller to the right (in the clockwisedirection).(2) About the buttons / indicatorsRegarding the individual buttons and indicators, the respectiveshapes of the buttons / indicators have been made into icons.Example (button):Example (indicator):Regarding the buttons whose functions change when the(SHIFT) button is pressed, both functions have been indicated.The description of operations when the button is pressedsimultaneously with is for the case when the bottom functionindication (with square border) has been pressed.Example:Simultaneous operation of multiple buttons is indicated by “+”. Example:Regarding the buttons whose functions change in the SEL state (theSEL indicator is blinking) when the (SEL) button is pressed,both functions have been indicated. In the SEL selected state, thefunction indicated on the bottom part of the button is executed whenthe button is pressed.Example:Zoom wheel controllerJoystick unitTop buttonIndicator nameIndicator (LED)SEL buttonSEL indicatorFunction when pressed simultaneously withthe depression of the SHIFT button.The function when pressed in the SEL state(the SEL indicator is blinking)*1 Interpret "up - down" as "front - back" when the joystick is being operated independently and the camera is not being operated.