Panasonic WV-CU980 Software Update Procedure

Also see for WV-CU980: Operating instructions

Panasonic WV-CU980 Software Update Procedure Manual pdf 1 page image

1WV-CU980 software update procedureThis manual describes the software update procedures for WV-CU980 (hereafter also referred to as this product).Use the i-PRO Configuration Tool to update the software.First, read ‘Installing the i-PRO Configuration Tool’ on page 3 of this manual, and install the Configuration Tool on yourPC. Also, connect this product and the PC to the network.Note• In this manual, ‘This product software’ is called ‘software’ or ‘firmware’.1 Insert the power supply plug of the AC adapterinto a power socket while simultaneouslypressing + +The administrator ID input screen is displayed.2 Enter the administrator ID using the numericbuttonsThe administrator ID that has been input is displayed onthe screen.3 PressThe password input screen is displayed.4 Enter the administrator password using thenumeric buttons5 PressWhen a wrong administrator ID or password has beeninput, the blinking message ‘Invalid’ will be displayed for afew seconds, and then the display returns to theadministrator ID input screen. Input again the correctadministrator ID and password. If the admin ID andpassword are entered correctly, the software receptionwaiting screen will be displayed.6 Use the i-PRO Configuration Tool to update thesoftware of this productRun ‘Software Update by i-PRO Configuration Tool’ onpage 4 of this manual.The software receiving screen is displayed.Note• Software update may take up to 1 minute while thesoftware receiving screen remains displayed.• Do not turn off the power of this product or performother operations while updating the software.• If an error occurs in communication with the i-PROConfiguration Tool, the software receiving screenmay not be displayed and the software updatefailure (download error) screen (described later) maybe displayed.• Contact your dealer for further information aboutthe firmware update.When the software update is completed, the softwareupdate completion screen is displayed.Software update complete (normal) screen is displayed.The next time you turn on this product, the updatedsoftware will start.WV-CU980 side operationOperation procedure