Panasonic WV-CU980/G Operating Instructions Manual

Also see for WV-CU980: Software update procedure

Panasonic WV-CU980/G Operating Instructions Manual Manual pdf 32 page image

32Main unit settings (continued)The procedure of making the administrator settings is given below.Note:• In order to ensure security, set an ID and password that cannot easily be guessed by a third party.• Take care not to forget the ID and password that have been set, and manage it appropriately away from the eyes of athird party.• In each input screen, the screen returns to the immediately previous screen when or is pressed.Operation procedure1 From the settings menu, select “005 Admin Setup”(☞ Page 22 Steps 1 to 2)2 PressThe current administrator ID setting is displayed.3 PressThe administrator ID setting screen is displayed.4 Input the administrator ID using the numericbuttonsThe administrator ID can be set within the values“00000000” to “99999999” (8 numeric digits).5 PressThe administrator password input screen is displayed.6 Input the administrator password using the numericbuttonsThe administrator password can be set within the values“00000000” to “99999999” (8 numeric digits).7 PressThe message “Passwd Re-enter” is displayed for a fewseconds, and the administrator password input screen isdisplayed again.8 Input again the administrator password that wasinput in Step 6The administrator password can be set within the values“00000000” to “99999999” (8 numeric digits).9 PressThe settings confirmation screen is displayed.When the administrator password input in Step 6 and Step 8are different from each other, the error message “PasswdMismatch” is displayed for a few seconds, and then thedisplay returns to the screen of Step 3. PressThe settings registration screen is displayed for a fewseconds.After that, the set value is stored, and the screen returns tothat of Step 2.When the logged-in user is not an administrator, theadministrator ID input screen is displayed before the currentadministrator ID setting is displayed (Step 2), and it will benecessary to input the administrator ID and password.For details of the method of inputting, refer to “Method ofUsing the Settings Menus” (☞ Page 22).Setting of the administrator