Panasonic VL-SWD501BX Operating Instructions Manual

Also see for VL-SWD501BX: Quick start guide Quick start guide

Contents

Panasonic VL-SWD501BX Operating Instructions Manual Manual pdf 33 page image

9.1 Changing how images are displayed (wide/zoom and pan/tiltsettings)When displaying doorphone and camera images, the display can be changed between wide and zoom displays, andthe zoom position can be changed using pan and tilt operations.OperationWide ® zoom Touch the position that you want toenlarge. ( )Entire image display ® zoom –Zoom ® wide ( )Entire image display ® wide –Wide ® entire image display –Pan/tilt Touch the position that you want toview.– See page 15 for an image of what the wide, zoom, and entire image displays look like.Note:R Because a digital zoom is used, the image quality of zoom display is lower than that of wide display or entire imagedisplay.R When images are recorded in zoom display, only the areas displayed are recorded.R When using the main monitor, pan and tilt, wide, zoom, and entire image display operations can be performedeven when playing recorded images.R Even if the display is changed, it will go back to the configured settings when the next image is displayed.– To change how incoming doorphone calls and monitored images are initially displayed, change the [Wide/Zoom settings] or [Zoom position settings] settings. (® page 15)– Incoming call images, monitored images, and recorded images from the camera can only initially be displayedin the wide display.9.2 Audio and display settings for talking and monitoringThe following audio and display settings can be configured for talking and monitoring with doorphones and cameras.Status Sound settings that can bechangedDisplay settings that can bechangedTalking or monitoring with adoorphoneR Receiving volume of incomingcallsR Owner’s voice volume (output tothe doorphone)*1R Voice changer function (makesthe voice output to thedoorphone sound deeper)R Doorphone LED lights’illumination (manually ON/OFF)*2R Doorphone backlightcompensation*2R Brightness settings*2Talking or monitoring with a camera R Receiving volume of incomingcalls R Brightness settings*3*1 This is the volume that can be heard outside at the doorphone when talking with the doorphone. (This setting canonly be changed by the main monitor.)*2 Can also be changed when there is an incoming call from the doorphone.*3 Can also be changed when there is an incoming call from the camera.339. . Additional functions9. Additional functions