Panasonic VL-SWD501BX Operating Instructions Manual

Also see for VL-SWD501BX: Quick start guide Quick start guide

Contents

Panasonic VL-SWD501BX Operating Instructions Manual Manual pdf 25 page image

2 Touch the time you want to turn off sensor detectionfor.R A beep sounds and "Off" is highlighted in yellowwhen settings are completed.3 To end the operation, press .Turning sensor detection back on againWhen sensor detection is turned off, it will automaticallyturn on again after the specified time has passed. Youcan turn on the sensor detection again at any time withthe following operations.1. From the top menu, touch ®OffOn toturn the sensor detection on again.2. To end the operation, press .Note:R The status of camera sensor detections can bechecked in the camera information menu. (®page 13)6.5 Recording camera images andconversationsCamera images with audio data can be recorded to anSD card. (Including doorphone images, a maximum of3,000 images can be saved.)6.5.1 Automatically recording images whensensors are triggeredWhen a sensor is triggered, images from 1 or 2seconds*1 before the detection are automaticallyrecorded*2 to an SD card. (® page 19)*1 The timing when recording starts before detectionsdepends on the [Recording before detection] setting.(® page 27)*2 When a call is made after a sensor is triggered, audiofrom the main monitor or sub monitor will also berecorded.When calls are not answered:Recorded images are saved as unchecked images, andthe notification indicator of the main monitor flashes toindicate that there are unchecked images.Note:R When there are multiple cameras, multiple incomingcalls may be received at the same time. In this case,the most recent incoming call is given priority andrecorded.R When there is an incoming call from another camerawhen talking or monitoring with a camera (®page 30, 31), you must end the call or monitoringin order to display and save the image from theincoming call.R When there are multiple cameras, and anothercamera’s sensor is triggered whilst receiving anincoming call, the recording time of camera images(about 30 seconds maximum) may be reduced.6.5.2 Recording images and audio until theend of calls (Record calls)To use this function, an SD card must be inserted in themain monitor and [Record calls] must be set to[Enable] (® page 36). With this function, calls can berecorded from start to finish in 1 video file that containsaudio data (max. length of about 120 seconds).6.5.3 Manually recording monitored imagesand playing recorded imagesThe operations are the same for doorphone images.– Manually recording monitored images. (® page 20)– Playing recorded images. (® page 20)256. Using a camera