Panasonic VL-SWD501BX Operating Instructions Manual

Also see for VL-SWD501BX: Quick start guide Quick start guide

Contents

Panasonic VL-SWD501BX Operating Instructions Manual Manual pdf 24 page image

1 : From the top menu, touch and thenthe image.R If the camera selection screen is displayed, touchthe number of the camera that you want tomonitor with and then the image.: ® : Select the camera you want tomonitor with. ® ( )2 The images from the camera are displayed.R Press to speak to the monitored party.3 To end the operation, press .Features available while monitoring– Adjust wide/zoom and pan/tilt settings (®page 33)– Adjust sound and display settings (® page 33)– Make a warning sound come out of the camera (®page 24)– Record monitored images (® page 20)Note:R Monitoring time:– : About 90 seconds (can be extended up to3 minutes by performing operations duringmonitoring)– : About 3 minutesR In situations where it is difficult to see images, suchas when it is dark or when there is backlight, changethe camera’s [Brightness] setting and activate the[Backlight compensation] setting as required. (®page 27)6.3 When camera sensors aretriggeredWhen a camera sensor is triggered, the main monitorand sub monitor are notified in the follow manner.1 When a sensor is triggered the ringtone sounds andcamera images are displayed for about 30 seconds.R Talking to the other party at the camera side:Press .R Monitoring (watching and listening) the otherparty without talking:: Touch .– The monitoring time is about 90 seconds (canbe extended up to 3 minutes by performingoperations during monitoring).: Press .– The monitoring time is about 3 minutes.R Making a warning sound come out of thecamera:: Touch ® [Warning sound] ®[Play sound].: ( ) ® : "Warning" ®( )Features available when a sensor is triggered– Adjust wide/zoom and pan/tilt settings (®page 33)– Adjust brightness settings (® page 34)– Record monitored images (® page 20)Note:R Images from when camera sensors are triggered areautomatically recorded to the SD card. (®page 25)R Once a sensor is triggered, the next sensor detectioncannot be made until about 10 seconds after the firsttriggered images have finished being displayed. (Thetime that detections are not made for can be selected.® page 26)R In situations where it is difficult to see images, suchas when it is dark or when there is backlight, changethe camera’s [Brightness] setting and activate the[Backlight compensation] setting as required. (®page 27)R The volume and the types of sounds used by the[Warning sound] setting can be changed. (®page 28)6.4 Turning off camera sensordetections for specified periodsof time (main monitor only)Camera sensor detections can be turned off for specifiedperiods of times as required.– When camera sensor detections are turned off,notifications are not sent to the main monitor and submonitor and images are not automatically recorded.– When there are multiple cameras, sensor detectionsfor all of the cameras will be turned off.1 From the top menu, touch ®OffOn .246. Using a camera