Panasonic TH-43LFE8U Operating Instructions Manual

Also see for TH-43LFE8E: Operating instructions

Contents

Panasonic TH-43LFE8U Operating Instructions Manual Manual pdf 79 page image

79English6 Select [YES] with and press.Data copy to the USB memory starts.The data will be overwritten when any data exists originally.Are you OK to write the data?Data to USB MemoryYES NOThe following message is displayed after data copyhas finished.Data copy finished.7 After data copy has finished, removethe USB memory device from the USBterminal.Copying the USB memory data to thedisplay1 Insert the USB memory device, whichthe data has been copied, to the USBterminal of the display for data copy(same as the step 1 on page 78).Note● If the USB memory containing the data for cloningis connected in power-on state, the [Select CopyType] message in step 5 is displayed. Select [USBMemory → Display].2 Display [Setup] menu pressing.3 Select [OSD Language] with andpress for over 3 seconds.The following display appears.OptionsDisplay serial numberShippingUSB data cloningSoftware licenses4 Select [USB data cloning] withand press .5 Select [USB Memory → Display] withand press .Select Copy TypeDisplay → USB MemoryUSB Memory → Display6 Select [YES] with and press.Data copy to the display starts.Do you copy the data?Data from USB MemoryYES NOThe following message is displayed after data copyhas finished.Cloning finished.Please turn off the power.7 After data copy has finished, removethe USB memory device from the USBterminal.8 Press the power switch ( ) of thedisplay unit to turn the power OFF,and turn the power ON again.The copied content is applied to the display.