Panasonic TH-43LFE8U Operating Instructions Manual

Also see for TH-43LFE8E: Operating instructions

Contents

Panasonic TH-43LFE8U Operating Instructions Manual Manual pdf 35 page image

35EnglishNote● Set [Network control] of all displays to [On]. (see page55)● Depending on the network environment,synchronization may be largely lost.● Do not connect other devices to prevent networktraffic jam.● With a router put in between, you cannot set upconnection. Use them within the same subnet.● Do not use wireless LAN for connection sinceplayback may not be performed normally.Starting / ending Media Player■ For Single Media PlayerStart1. Insert USB memory for Media Player.Note● Depending on the type of a USB memorydevice, it may come in contact with theperiphery such as a back cover, and cannot beattached. Use a commercially sold extensioncable, or use a small type of a USB memorydevice connectable to this unit.USBmemoryUSBterminal2. Run a USB memory contents check.3. Change INPUT to USB.EndingChange INPUT to other than USB.■ For Multi Media PlayerStart1. Connect several units with LAN cables.(see page 34 "Example of setting up LANconnection and IP address / Subnet mask")2. Insert USB memory for Media Player into eachDisplay.3. Executes USB memory contents check oneach Display.4. Change INPUT for Slave to [USB].5. Change INPUT for Master to [USB].EndingChange INPUT for Master to other than [USB]Resume Play functionAfter Media Player ends, the file to be resumed whenresuming playing varies depending on the setting of[USB media player settings] - [Resume play].When set to [On]:The file played prior to the end of Media Player startsplaying from the beginning.When set to [Off]:Play starts from the beginning of the first file of thescenario.Note● The resume play function is retained until the unit isturned off or the USB memory device is taken out.