Panasonic TH-43LFE8U Operating Instructions Manual

Also see for TH-43LFE8E: Operating instructions

Contents

Panasonic TH-43LFE8U Operating Instructions Manual Manual pdf 56 page image

English56Note● When the PJLink protocol is used, the port setting isnot necessary.■ [Network status]Checks the current Network settings status.192. 168. 0. 1255. 255. 255. 0192. 168. 0. 812:34:56:78:9A:BCNetwork statusDHCPIP addressSubnet maskGatewayMAC addressOff■ [AMX D.D.]Set whether to allow the Display to be detected byAMX Device Discovery.[On]:Enables detection by AMX Device Discovery.[Off]:Disables detection by AMX Device Discovery.● For more details, visit the following web site.http://www.amx.com/■ [Crestron Connected™]When this function is set to [On], the Display canbe monitored or controlled via the network usingequipment and application software of CrestronElectronics, Inc.This Display supports the following applicationsoftware from Crestron Electronics, Inc.● RoomView® Express● Fusion RV®● RoomView® Server Edition[Crestron Connected™] is a function to connect toa system developed by Crestron Electronics, Inc.which manages and controls multiple system devicesconnected to the network.● For details of “Crestron Connected™”, refer to theCrestron Electronics, Inc. website (Provided onlyin English).http://www.crestron.com/For the download of “RoomView® Express”, refer tothe Crestron Electronics, Inc. website (Provided onlyin English).http://www.crestron.com/getroomview■ [Reset]You can reset the network setting to the factorydefault of the Display.Select [Yes] with . and press .Network settingsResetYes NoUSB media player settingsSet for USB media player function.USB media player settingsUSB media player settingsUSB media playerResume playScenario file checkNo scenario fileSlide show durationEnable10 secOn■ USB media playerSet to enable or disable to USB media playerfunction.■ Resume PlaySet to enable or disable to play to be resumed.■ Scenario file checkExecute the USB memory contents check. If anyerror is detected, the error code and file namewill be displayed.For details of the error codes, refer to “USBmemory contents check”.(see page 34)Select [Scenario file check] with and press.AvailableScenario file check■ Slide show durationSelect the displaying duration for still images.10 sec - 600 sec