15EnglishVideo equipment connection1 AV IN (VIDEO): Composite Video Input TerminalConnect to video equipment such asVCR or DVD player, etc.(see page 19)2 PC IN: PC Input TerminalConnect to video terminal of PC,video equipment with “Y, PB(CB),PR(CR)” or “R, G, B” output.(see page 18)3 AV IN(HDMI 1,HDMI 2):HDMI Input TerminalConnect to video equipment such asVCR or DVD player, etc.(see page 16)4 DVI-D IN: DVI-D Input TerminalConnect to video equipment withDVI-D output.(see page 17)5 SERIAL IN: Serial Control TerminalControl the Display by connectingto PC.(see page 19)6 LAN: LAN TerminalControl the Display by connecting toNetwork.(see page 64)7 USB: USB Memory TerminalConnect the USB memory to usethe USB media player function. Also,this can be used to supply power ofup to 5V/1A to an external devicewhen receiving images.(see page 22,31)8 IR IN, IR OUT: Infrared Signal Input/outputTerminalUse this when operating more thanone display with one remote control.(see page 21)9 AUDIO IN: Audio input terminal shared withDVI-D IN and PC IN(see page 17,18)10 AUDIO OUT: Analogue Audio Output TerminalConnect to audio equipment withanalogue audio input terminal.(see page 21)Note● Depending on the outer shape of the plug of aconnection cable, it may come in contact with the plugof an adjacent connection cable or the periphery suchas a back cover. Use a connection cable with thesuitable plug size for the terminal alignment.● Due to the terminal block construction, someconnection cables and USB memory devices cannotbe used. Be sure to check the “CONNECTIONTERMINAL” information in the product specificationsheet. For the information about productspecifications, visit the following web site. http://panasonic.net/prodisplays/download/specsheets02.html