1.2.2.7 Log-in/Log-outDescriptionMembers of an incoming call distribution group can join (Log-in) or leave (Log-out) the group manually.They can leave the group temporarily when they are away from their desks, to prevent calls being sent to theirextensions. They can return to the group when they are ready to answer calls.Wrap-up:While logged in, a member extension can have a preprogrammed time period automatically for refusing callsafter completing the previous call (Wrap-up time). While the Wrap-up timer is active, calls to all incoming calldistribution groups to which the extension belongs will skip the extension so that the extension user can performnecessary tasks such as reporting on the previous call.Wrap-up mode can also be activated manually (Not Ready) by pressing the Wrap-up button.[Log-in/Log-out and Wrap-up Status Example]Log-outIncoming call Log-inReady ReadyReady Not ReadyExtn.101Extn.102Extn.102Extn.103Extn.104Wrap-upExtn.105Extn.106ReadyWaiting for a callAftercompletingthe callAnswering a callWrap-upMaking a reportNot ReadyMaking a report/temporary breakThe Wrap-uptime expires.Press theWrap-up button.Press theWrap-up button.Conditions• It is programmable whether the last remaining logged-in extension can log out.• Log-in/Log-out ButtonA flexible button can be customised as the Log-in/Log-out button with the following parameters:Parameter UsageLight PatternRed on OffNo parameter Used with an ICD Groupbutton, or with the floatingextension number of anincoming call distributiongroup, or with (All).— —Floating extension number of aspecified incoming calldistribution groupUsed to log in to or out of thespecified incoming calldistribution group.Log-outStatusLog-in StatusFeature Guide 611.2.2 Incoming Call Distribution Group Features
