1.20.4 Display InformationDescriptionA display PT shows the user the following information while making or receiving calls if they are available:Display Item Display Example ConditionThe extension number and name of thecalling or called extension, or incoming calldistribution group123: Tom Smith –Status of the called extension 123: Busy –The number and name of the optional device D02: 1st Door –The dialled telephone number 1234567890 –The received call informationa. Caller’s nameb. Caller’s numberc. Trunk number/named. Original Destination, if the call isforwardede. DDI/DID/MSN nameABC Company12345678Line 001: Sales®102:MikePanasonicThe first line message canbe either (a), (c), or (e) ateach extension throughsystem programming.These can be displayed inturn by pressing theTRANSFER button orDISP Soft button during acall.Call charge fee during a trunk call. 12.35 The currency, position ofthe currency symbol, andthe decimal point areprogrammable.Call duration during a trunk call. Line 001 11:02’28 –Conditions• Multilingual DisplayEach extension can select its display language through personal programming (Display LanguageSelection).• Display ContrastIt is possible to adjust the display contrast through personal programming (Display Contrast Selection).This is available only for DPTs and IP-PTs.• Display BacklightSome extensions can select whether to turn the display backlight on or off through personal programming(Display Backlight Selection). For details, refer to the manual for your telephone.• Characters (name) or digits (number) exceeding the display’s size limitation are not displayed. In this case,information which have been programmed is hidden, but not altered.PC Programming Manual References4.17 [2-9] System Options—Option 5— PT Feature Access—No. 1–86.1 [4-1-1] Wired Extension—Extension Settings—Option 5→ Display Language→ Incoming Call Display→ Automatic LCD Switch when Start Talking230 Feature Guide1.20.4 Display Information
