1.29 Audible Tone Features1.29.1 Dial ToneDescriptionThe following distinctive dial tones inform extensions about features activated on their extensions.Each dial tone type has two frequencies (e.g., dial tone 1A and dial tone 1B).Type DescriptionTone 1A/1B A normal dial tone is heard when:a. No features listed for dial tones 2 through 4 has beenset, orb. ARS is usedTone 2A/2B This tone is heard when:• There are messages that have previously been listenedto and no new messages on the ESVM card.*1• Any of the features below are set.• Absent Message• BGM• FWD• Call Pickup Deny• Call Waiting• DND• Extension Dial Lock• Executive Busy Override Deny• Hot Line• Timed ReminderTone 3A/3B This tone is heard when:• A called PS is being searched for.• The recording time used by the Built-in Simplified VoiceMessage feature reaches the limit.*1• Any of the features below are performed.• Account Code Entry• Consultation Hold• Answering a Timed Reminder call with no message• Answering a sensor callTone 4A/4B This tone is heard when new messages have been recordedfor the extension.*1 Active even when distinctive dial tones are disabled.Conditions• Dial Tone Type A/BIt is possible to select dial tone type A or B for dial tones 1 through 4. If "Type A" is selected, all dial tones1 through 4 will become dial tone type A.The dial tone type for the ARS feature can be selected separately. If "Type A" is selected for the ARS,dial tone 1A will be heard. If "Type B" is selected, dial tone 1B will be heard.Feature Guide 3071.29.1 Dial Tone
