1.11.4 Headset OperationDescriptionThis PBX allows the use of headset-compatible PTs. A PT user can talk to another party without lifting thehandset. This feature is also known as Handset/Headset Selection.For connection and operation, refer to the Operating Instructions for the headset.Conditions• Hardware Requirement: An optional headset.• If headset mode is on, pressing the SP-PHONE button activates the headset, not the built-in speaker.• To set headset mode on a DPT, use personal programming (Headset Operation) or press the Headsetbutton.• Headset ButtonA flexible button on a DPT can be customised as a Headset button.• Answer/Release ButtonA flexible button can be customised as an Answer button or a Release button. Such buttons are useful forheadset operation. It is possible to answer an incoming call by pressing an Answer button. While hearingthe Call Waiting tone during a conversation, pressing an Answer button enables one to answer the secondcall by placing the current call on hold. Pressing a Release button enables one to disconnect the line duringor after conversation, or to complete a Call Transfer.• It is possible to switch from headset mode to hands-free mode or vice versa during a conversation bypressing the Headset button.• Headset users cannot use the following features:– Automatic Redial (® 1.6.1.4 Last Number Redial)– Receiving OHCA (® 1.8.4.3 Off-hook Call Announcement (OHCA))– Receiving Whisper OHCA (® 1.8.4.4 Whisper OHCA)PC Programming Manual References3.4 [1-1] Slot—Port Property - Extension Port— Headset OFF/ON3.37 [1-1] Slot—Port Property - IP-Extension Port—IP-PT Registration and De-registration— Headset OFF/ON6.5 [4-1-4] Wired Extension—Flexible Button— Type6.17 [4-3] DSS Console— TypeFeature Guide References1.20.2 Flexible ButtonsUser Manual References1.3.5 Using the Answer/Release Button1.4.8 Using the Headset (Headset Operation)3.1.2 Settings on the Programming ModeFeature Guide 1511.11.4 Headset Operation
