1.1.1.6 Intercept RoutingDescriptionProvides automatic redirection of incoming trunk and intercom calls. There are three types of Intercept Routingas follows:Feature DescriptionIntercept Routing—No Answer(IRNA)If a called party does not answer a call within a preprogrammed timeperiod (IRNA Timer), the call is redirected to the preprogrammeddestination.Intercept Routing—Busy If a called party is already handling a call, new calls are handled asfollows:– The call is redirected to the preprogrammed Intercept Routing—Busy destination.– If an Intercept Routing—Busy destination is not enabled, thecaller will hear a busy tone. However, if the call is made throughan LCOT/CLCOT or T1 [LCOT/GCOT] card, the caller hears aringback tone.Intercept Routing—DND If a called party is in DND mode, the call is redirected to thepreprogrammed destination.Intercept destinations can be assigned to extension ports.® 6.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination— Intercept Destination—Whencalled party does not answer—Day, Lunch, Break, Night® 6.10 [4-2-1] Portable Station—Extension Settings—Intercept Destination— Intercept Destination—Whencalled party does not answer—Day, Lunch, Break, Night® [604] Extension Intercept DestinationWhen the original destination is: The Available Intercept Destination is:• Wired Extension (PT/SLT/T1-OPX)• PSThe destination assigned to the original extension.6.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination→ Intercept Destination—When called partydoes not answer—Day, Lunch, Break, Night→ Intercept Destination—When Called Party isBusy6.10 [4-2-1] Portable Station—Extension Settings—Intercept Destination→ Intercept Destination—When called partydoes not answer—Day, Lunch, Break, Night→ Intercept Destination—When Called Party isBusy® [604] Extension Intercept Destination28 Feature Guide1.1.1 Incoming Trunk Call Features
