Presence Select window, use the Navigator key toselect a presence status, and then press . Youcan also change the presence settings via theOptions screen.For details, see "Presence Settings (Page 127)".• You can assign Call Forwarding/Do Not Disturbsettings to a presence status.For details, see "Presence Setting Example 1(Page 128)".• You can assign a feature number to be executedwhen you select a presence status.For details, see "Presence Setting Example 2(Page 128)".• Your presence status is stored on the PBX as anabsent message.Note• Depending on the regional setting (suffix code)of the connected PBX, if you set the languageto Russian or Ukrainian, your presence statusmight appear garbled.• If you use characters in your presence statusthat are not supported by the PBX, thosecharacters will not display correctly on otherdevices. For a partial list of characterssupported by the PBX, see "Character Tables(Page 155)". For a full list, see thedocumentation for the PBX.Call Forwarding/Do NotDisturbYou can have incoming calls automatically forwardedto another destination. You can also have incomingcalls rejected (Do Not Disturb).Simple Call Forwarding SettingsYou can set one forwarding destination for external andinternal calls.1. On the HOME screen, press the second drop-downlist.If call forwarding or Do Not Disturb is already set,the Advanced window appears. See "AdvancedCall Forwarding/Do Not Disturb Settings(Page 84)".2. On the FWD/DND Settings window, select one ofthe text fields.3. Enter a forwarding destination.4. Select the radio button of the destination you wantto forward calls to.5. Press OK.Usage tips• On the FWD/DND Settings window, the numbersyou set for Phone 1 and Phone 2 are saved. Thesesettings will be available the next time you set aforwarding destination.Other is used for a temporary forwardingdestination. Every time you set a forwardingdestination, Other will be blank.• You can set your cellular phone as the forwarddestination.Operating Instructions 83Basic Feature Operation
