1. On the Call Log screen, select the call log you wantto add a contact from.• Outgoing: Select from outgoing calls• Incoming: Select from incoming calls• Missed: Select from missed calls2. Select the entry with the information that you wantto add.3. Press Add to Directory.The Add Contact window appears. The phonenumber and name (if available) from the entry willbe filled in.4. Enter any additional information as necessary.For details about the fields, see "Details forContacts (Page 115)".5. Press OK.Usage tips• You can delete the call log entry by pressing .Adding a Contact from the PBXYou can add new personal contacts from the systemspeed dialling directory and the extension directory.1. On the Contacts screen, make sure the localdirectory is displayed.2. Select the contact you want to add from the systemspeed dialling directory or the extension directory.Note• To display the system speed diallingdirectory and extension directory, thecorresponding check boxes have to beselected in the Directory List Selectsettings. See "Directory List Select Settings(Page 124)".3. Press .4. Fill in the fields as necessary.For details about the fields, see "Details forContacts (Page 115)".5. Press OK.Adding a Contact from an LDAPDirectoryYou can add new personal contacts from an LDAPdirectory.1. On the Contacts screen, make sure the LDAPdirectory is displayed.2. Select the contact you want to add.3. Press .4. Fill in the fields as necessary.For details about the fields, see "Details forContacts (Page 115)".5. Press OK.Editing a ContactYou can edit the information for personal contacts in thelocal directory.1. On the Contacts screen, make sure the localdirectory is displayed.2. Select the contact you want to edit.3. Press .4. Edit the information if necessary, and then pressOK.For details about the fields, see "Details forContacts (Page 115)".Usage tips• To edit contacts in the extension directory or in anLDAP directory, first add them to your personalcontacts.114 Operating InstructionsContact Management
