Panasonic AU-EVA1 Operating Instructions Manual

Also see for AU-EVA1: Manual Setup guide Manual

– 87 –Chapter 4 Operation — Menu setting contents[(B-G)]Adjusts the linear matrix. (Blue - Green)The items that can be set are as follows.f [−63]…[63][COLOR CORRECTION]For details of setting, refer to “[COLOR CORRECTION]”.[SW] Enables/disables the color correction function.The items that can be set are as follows.f [ON], [OFF][PARAM] This function sets color saturation and phase. It can be set to individual color hue.The items that can be set are as follows.f [−63]…[63][REC SETTINGS] menuSets the various items in the recording function.[CARDS/MEDIA][FORMAT MEDIA]Formats the SD card in the specified slot. Data deleted as a result of formatting cannot be restored. Always confirm the data before formatting.The items that can be selected are as follows.f [SLOT1], [SLOT2][CLIP NAME][CAM INDEX]Sets the CAM INDEX used in the name for the MOV format file to be recorded. Set one upper case alphabetical character. This is used as a value to bestored in the volume label of the SD card.The items that can be set are as follows.f [A]…[Z](Factory setting: [A])@@ NOTEt This will be stored in the volume label of the SD card, but will not be used in the file name when the [SYSTEM SETTINGS] menu → [SYSTEM MODE]→ [MAIN CODEC] is set to AVCHD format.[NEXT REEL COUNT]Sets the REEL COUNT used in the name for the MOV format file to be recorded. The setting value of [NEXT REEL COUNT] is stored in the volumelabel of the SD card as REEL COUNT together with the setting value of [CAM INDEX]. Also, the setting value will increase one after storing. (It willreturn to [001] after [999])f When the SD card is formattedf When recorded to the SD card where REEL COUNT is not stored in the volume labelThe items that can be set are as follows.f [001]…[999](Factory setting: [001])@@ NOTEt This will be stored in the volume label of the SD card, but will not be used in the file name when the [SYSTEM SETTINGS] menu → [SYSTEM MODE]→ [MAIN CODEC] is set to AVCHD format.[2 SLOTS FUNC.]Sets the recording function using two SD cards.[OFF] Does not set.[RELAY REC] Sets to relay recording.[SIMUL REC] Sets to simultaneous recording.(Factory setting: [RELAY REC])@@ NOTEt For the combination that can be set and restriction, refer to “Recording function that cannot be used simultaneously”.