– 142 –Chapter 6 Playback — Thumbnail operationThumbnail operationThumbnail operation overviewA clip is a group of data recorded by a single shooting, which includes additional information such as image, audio, and meta data.The following operations can be performed while viewing the clip thumbnails displayed on the LCD monitor.f Playback, delete, and copy of a clip (only possible for a clip recorded in AVCHD)There is a method to operate with the multidial or a grip multidial, or a method to operate by touching the LCD monitor.@@ NOTEt The thumbnail screen is not displayed when the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF].Thumbnail screenThe thumbnail screen is displayed when the button is pressed while the VIEW screen or the HOME screen is displayed.Pressing the button again displays the VIEW screen.To return to the HOME screen, press the button.The clips in the recording codec (MOV or AVCHD) selected in the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [MAIN CODEC] is displayed inthe thumbnail screen.Also, menu in the thumbnail screen can be operated by pressing the COPY1102 3 4 5 697 81 Clip status display[ALL SLOT]: Displays all the clips recorded on all the SD cards in each card slot. Displays in [ALL SLOT] when the thumbnail screen is displayedfrom the VIEW screen or the HOME screen.[SLOT1]: Displays only the clips recorded on the SD card in card slot 1.[SLOT2]: Displays only the clips recorded on the SD card in card slot 2.[SLOT1→SLOT2]: Displays when copying from the SD card in the card slot 1 to the SD card in the card slot 2.[SLOT2→SLOT1]: Displays when copying from the SD card in the card slot 2 to the SD card in the card slot 1.2 Function displayThis is displayed during the operation of copy, delete, protect, etc.3 Recording mode: Displays when MOV is selected as the recording codec.: Displays when AVCHD is selected as the recording codec.: Displays when MOV is selected as recording codec, and if there is at least one AVCHD clip in any of the SD cards. This is not displayed ifthere is no AVCHD clip.: Displays when AVCHD is selected as recording codec, and if there is at least one MOV clip in any of the SD cards. This is not displayed ifthere is no MOV clip.4 Media status displayThe card slot number of the SD card where the clip in the cursor position is recorded is displayed in yellow.5 Wireless LAN connection status displayDisplays the connection status of the wireless LAN.(No display): It is not connected to a wireless LAN. It is set to the [NETWORK SETTINGS] menu → [NETWORK SEL] → [OFF].: A status where ROP is not connected.: A status where ROP is connected.6 Power status display: Indicates the remaining battery level while powered with the battery.: Displays when powered with the AC adaptor.7 Cursor8 Clip that cannot be played backDisplays when the clip cannot be played back in the camera such as standard violation.
