Panasonic AU-EVA1 Operating Instructions Manual

Also see for AU-EVA1: Manual Setup guide Manual

– 79 –Chapter 4 Operation — Menu setting contents[DATE FORMAT]Sets the display order of the year, month, and date of the calendar (date of the built-in clock). This is reflected to the date display of the clip information.The items that can be set are as follows.f [Y-M-D], [M-D-Y], [D-M-Y](Factory setting: [Y-M-D] (when [AREA SETTINGS] is set to [AREA 1]), [M-D-Y] (when [AREA SETTINGS] is set to [AREA 2]), [D-M-Y] (when [AREASETTINGS] is set to [AREA 3]))[INFORMATION]Displays the information of the camera.[VERSION] [MODEL] Displays the product name of the camera.[SERIAL NO.] Displays the serial number of the camera.[VERSION] Displays the firmware version of the camera.[OPERATION TIME] [TOTAL OPERATION] Displays the total operation time.[IRIS DIAL] Displays the total number of upward rotation or downward rotation of the dial byupdating every time it reaches 100 turns. (“T” indicates the number.)[SENSOR TEMP] Displays the ambient temperature of the image sensor.[USB SERVICE MODE] Switches to the USB service mode.[UPDATE] Updates the firmware.[LANGUAGE]Sets the display language.This is not displayed when the [OPTION] menu → [AREA SETTINGS] → [AREA 1] is set.This is displayed only when the [OPTION] menu → [AREA SETTINGS] → [AREA 2]/[AREA 3] is set.[English] English[Español] Spanish[Français] French(Factory setting: [English])[INITIALIZE][LOAD FACTORY DATA]Returns the setting value of the menu to the factory setting. The camera is restarted after executing.The items that can be selected are as follows.f [YES], [NO][CAMERA SETTINGS] menuSets the basic camera function.This menu cannot be set when the thumbnail screen is displayed.[FPS][VFR SW]Enables/disables the variable frame rate recording function.[ON] Enables the variable frame rate recording function. The arbitrary frame rate can be set in [VALUE] of [FPS]. Audio cannot berecorded when [FREQUENCY] and [FPS] are different.[OFF] Disables the variable frame rate recording function.(Factory setting: [OFF])[VALUE]Selects the arbitrary frame rate.(Factory setting: The value set in [FREQUENCY])[ADD]Newly registers the frame rate. The newly registered value can be selected in [VALUE] of [FPS].Maximum of 150 values can be registered. It cannot be registered when there are 150 registered already.[EDIT]The currently selected setting value can be edited. It will be saved after updating the setting value.[DELETE]Deletes the currently selected setting value.It cannot be deleted if there is only one registered setting value.[SHUTTER]