– 78 –Chapter 4 Operation — Menu setting contents[ACCESS LED]Sets if the card access lamp is to illuminate or not.The items that can be set are as follows.f [ON], [OFF](Factory setting: [ON])[POWER LED]Sets if the power lamp is to illuminate or not.The items that can be set are as follows.f [ON], [OFF](Factory setting: [ON])@@ NOTEt It will illuminate approximately one second even if it is set to [OFF].[FAN SPEED]Sets the rotation speed of the fan.[AUTO] It will rotate in slow speed until the specified temperature is reached, and then it will rotate in the same speed as [FULL]when the specified temperature is reached.[FULL] It will always rotate in constant speed.(Factory setting: [AUTO])[LCD][BRIGHTNESS]Adjusts the brightness of the LCD monitor.The items that can be set are as follows.f [−15]…[15](Factory setting: [0])[COLOR LEVEL]Adjusts the color level of the LCD monitor color.The items that can be set are as follows.f [−15]…[15](Factory setting: [0])[CONTRAST]Adjusts the contrast of the LCD monitor.The items that can be set are as follows.f [−30]…[30](Factory setting: [0])[BACK LIGHT]Adjusts the brightness of the LCD monitor backlight. [0] is the standard brightness.When [POWER LCD] is assigned to the USER button and the function is enabled, the brightness will not change even when the setting of [BACKLIGHT] is changed.The items that can be set are as follows.f [−1], [0], [1](Factory setting: [0])[CLOCK][CLOCK SETTING]Sets the calendar (date of the built-in clock) and time.[YEAR] [2017]…[2037][MONTH] [JAN]…[DEC] ([1]…[12])[DAY] [1]…[31] ([28], [29], [30])[HOUR] [0]…[23][MINUTE] [0]…[59](Factory setting: [YEAR]: [2017], [MONTH]: [1], [DAY]: [1], [HOUR]: [0], [MINUTE]: [0])[TIME ZONE]Sets the time zone. It will switch to the time with the time difference added when the time zone setting is changed.The items that can be set are as follows.f [−12:00]…[+12:30] (30 minutes steps), [+12:45], [+13:00](Factory setting: [+0:00])