Panasonic AU-EVA1 Operating Instructions Manual

Also see for AU-EVA1: Manual Setup guide Manual

– 162 –Chapter 8 Connecting to External Devices — Preparing to connect the iPad or Android terminalPreparing to connect the iPad or Android terminalMounting the wireless moduleMount the wireless module (optional) to the camera.Before mounting or removing the wireless module, always turn the power switch to < > (standby), and confirm that the power lamp is off.1 Open the terminal cover for the at the rear.2 Connect the wireless module to the terminal.Insert it all the way.f For details on the wireless module supporting the camera, visit the support desk at the following website.https://pro-av.panasonic.net/Cautions when using wireless module AJ-WM50Read the operating manual of the wireless module thoroughly and understand it before using.For the latest information, visit the support desk at the following website.https://pro-av.panasonic.net/Preparing the EVA ROP appInstall the EVA ROP app into the iPad or Android terminal.r For iPadf Download the EVA ROP app from App Store.r For Android terminalf Download the EVA ROP app from Google Play Store.@@ NOTEt For details such as OS that supports EVA ROP app, refer to the support desk at the following website:https://pro-av.panasonic.net/Operation while the EVA ROP app is connectedr Operation of the camera that is connectedFollowing buttons and dial cannot be used.f buttonf buttonr Recording and playback operation while connectedf Recording can be operated by either the camera or the EVA ROP app.f Playback operation is not possible.@@ NOTEt The content set with the remote operation using the EVA ROP app is reflected to the camera.